SEK Sure Strip

• Powerful Stripping Technology: Strips Away a Variety of Sealers & Coatings
• Fast Acting: Works in Minutes
• Safe For Most Surfaces: Does Not Damage or Etch Surfaces
• Ready to Use Formula: No Dilution Necessary
• Clean Rinse Technology: Sealer & Stripper Residue Rinses Away Easily

SureStrip is a technologically advanced stripper designed for removal of acrylics, acrylic latex, polyurethane and other resin coatings and sealers. It can also be used as a spot cleaner to remover paint spots. SureStrip is recommended for outdoor use only and works best on horizontal surfaces. SureStrip’s Clean Rinse Technology allows old sealer and stripper residue to be quickly and easily rinsed away with a low or high pressure washer.  SureStrip is ready-to-use and should not be diluted. SureStrip will remove most Surebond film forming sealers.  Not appropriate for use with SB-4000, SB-4400, SB-5000, SB-6400, SB-6700 and SB-6750.

Suitable Surfaces

Suitable for concrete and clay pavers, flat and stamped concrete, masonry, natural and manufactured stone, segmental retaining wall blocks, concrete walls and exposed aggregate. Can also be used on tile, terrazzo and stucco.  Safe to use on surfaces in outside environments. Use caution on sensitive surfaces such as wet cast pavers and stamped concrete as it may cause damage to color of the surface. Not for use on asphalt. Test first to verify suitability and dwell time before stripping the entire surface.

SureStrip is compatible with all Surebond Sealers. A test area is always recommended to determine product suitability and compatibility with your specific surface before use and also if desired results are achievable.

Coverage Per Gallon

Coverage based on single treatment. Some applications may require additional treatments. Coverage rate may vary depending on the surface porosity, texture, severity of staining, application method and local conditions.

SureStrip-SDS-3.3.21

SureStrip-TDS-12.23